4
3
2
1
Assemble guide assembly as shown using lock knob (2), guide (3) and square nut (4).
9.
Attach levers to feed adjust plates as shown.
Attach lever (5) through feed scale mount using 1 ea. (M10) bolt (2), flat washer (16), spring
(3), handle washer (4), and lock nut (6).
Place connecting rod (1) through hole at bottom of lever (5) and attach using flat washer
(15) and cotter pin (17).
Place other end of connecting rod (1) into arm of
top
plate and attach using flat washer (15)
and cotter pin (17).
Next attach lever (7) to fixed pin (11) using flat washer (8) and cotter pin (9). Then attach
opposite end of lever (7) to
bottom
plate arm using shaft pin (14), flat washer (8) and cotter
pin (9).
11.
1
2
16 3 4 5
6
7
8
9
10
11
12
15
17
8
14
13
15
4
