LABEL SHOULD
BE UPWARDS.
2
3
1
4
4
5
2
3
1
4
5
6
6
5
2
5
6
Assemble wheels to Spreader using 2 ea.
(M8) bolts, flat washers, and lock nuts. Then
assemble hopper to spreader base using 3
ea. (M10) bolts (4), nuts (2) and lock washers
(5).
Fasten heads inside hopper as
shown.
6.
Assembly wind drift braces (3) using 3 ea.
(M8) bolts (2), nuts (4), flat washer (6), and
lock washers (5), attach as shown.
7.
Attach wind drift shield (2) with 3 ea. (M6) bolt
(3), nuts (4), flat washer (7) and lock washers
(6) as shown.
8.
2
3
6
5
4
7
1
4
2
1
3
6
5
4
Attach hopper auger (3) to shaft (1) using 1 ea.
(M10) bolt (2), nut (4) and lock washer (5).
Make sure label faces upward as shown.
9.
3
