(Qty 4 #36214)
1/4-20 X 1-1/2”
Philips Panhead
(Qty 4 #36300)
1/4-20 SS Locknut
36210
Qty 2
36214
Qty 4
31100
Qty 7
31114
Qty 2
32103
Qty 8
31106
Qty 3
32100
Qty 2
33117
Qty 1
36105
Qty 1
33108
Qty 1
33109
Qty 1
36300
Qty 6
12152
Qty 2
12148
Qty 2
vvvvvvvv
vvvvvvvv
22
28
12
9
10
14
36
6
21
37
9
15
18
1.
Remove and identify all loose parts from carton
.
2.
Position hopper on side. Install frame using (4) 1/4-20 x 1-1/2” Pan Head
Phillips machine screws and (4) 1/4-20 nylon insert locknuts. First put bolts
through holes in frame then through holes in bottom of hopper. Secure with
locknuts.
TIGHTEN THESE LOCKNUTS NOW
DO NOT TIGHTEN WITH POWER TOOLS.
Pt# 52165
PAGE 1
2
170T C
ommerCial
T
ow
B
roadCasT
s
preader
ASSEMBLY and OPERATING INSTRUCTIONS
Rev.1-10
EarthWay
EarthWay
EV-N-SPRED
EV-N-SPRED
®
®
GT
GT
PLEASE CALL
IF YOU ARE MISSING ANY PARTS, HAVE ANY DIFFICULTY IN ASSEMBLY, OR HAVE ANY QUESTIONS
REGARDING THE SAFE OPERATION OF THIS SPREADER. THIS MODEL INCLUDES
LIFETIME TECHNICAL SUPPORT
SUPPORT HOT LINE: 574-848-7491 or 800-294-0671,
:
TeChsupporT
@
earThway
.
Com
HELPFUL HINTS:
READ THE DIRECTIONS BEFORE ASSEMBLY
;
If your spreader does not spread evenly, be sure the FRONT on the gear box points away from the tow bar of the spreader.
The impeller must turn clockwise. Reversing the gearbox will cause the impeller to turn counter clockwise. Clean the
impeller plate after each use. Fertilizer stuck on the impeller blades will cause uneven spreading.
;
Your spreader is designed to be pulled at three miles per hour, which is a brisk walking speed. Slower or faster speeds will
change the spread patterns. Wet fertilizer will also change the spread pattern and flow rate. Clean and dry your spreader
thoroughly after each use. A coating of light spray oil will help prevent corrosion. Wash between the shut off plate and
bottom of the hopper.
;
Gears are permanently lubricated at the factory. Do not open the gearbox or dirt may enter.