Komfovent MOU Series, Руководство по установке

Страница: 8 / 35

EN
UAB KOMFOVENT we reserve the right to make changes without prior notice
MOU_22-10
8
Drain Joint Installation
Before bolting the outdoor unit in place, you must install the drain joint at the bottom of the unit
(See Fig. 2.8).
1. Fit the rubber seal on the end of the drain joint that will connect to the outdoor unit.
2. Insert the drain joint into the hole in the base pan of the unit.
3. Rotate the drain joint 90° until it clicks in place facing the front of the unit.
4. Connect a drain hose extension (not included) to the drain joint to redirect water from the unit
during heating mode.
NOTE: Make sure the water drains to a safe location where it will not cause water damage or a slipping hazard.
Base pan hole
of outdoor unit
Seal
Seal
Drain joint
(A) (B)
Fig. 2.8