Komatsu WB93R-5, Руководство по эксплуатации и техническому обслуживанию

Страница: 32 / 284

GENERAL PRECAUTIONS
30
2.2 GENERAL PRECAUTIONS
2.2.1 GENERAL SAFETY RULES
q
Only trained and authorized personnel can use the machine and perform maintenance operations.
q
Follow all the safety rules, precautions and instructions when using the machine or performing maintenance op-
erations.
q
When working with other operators or when the work site is often occupied by other operators, make sure that
everyone knows and understands all the signs described above and, in any case, that everyone works in such a
way as to be able to see the machine and to be visible to the operator.
2.2.2 SAFETY DEVICES AND GUARDS
q
Make sure that all the guards and covers are in the correct position. Have guards and covers changed or re-
paired if damaged. Do not use the machine without guards, nor remove the guards when the engine is running.
q
Always use the proper safety devices to lock the machine when parking and remember to fasten the safety belt.
q
For the safety devices, see "3.1 SAFETY LOCKS".
q
For the safety belt, see "3.5.6 SAFETY BELT".
q
Do not remove the safety devices and always keep them in good operating conditions.
q
Any improper use of the safety devices may result in serious injury or even death.
2.2.3 CLOTHING AND PERSONAL PRO-
TECTION ITEMS
q
Do not wear large or loose clothes, rings and watches and
do not approach the machine with loose long hair, since they
can get entagled in the moving parts of the machine and
cause serious personal injury or damage. Also avoid wear-
ing clothes that are dirty with oil or fuel, since they catch fire
very easily.
q
Wear a hard hat, goggles, safety shoes, mask, gloves and
headphones when operating the machine or performing
maintenance operations.
q
Always wear safety goggles, a hard hat and heavy gloves if
your job involves scattering metal chips or minute materials;
these precautions are particularly useful when driving the
equipment connection pins with a hammer and when blow-
ing compressed air into the air filter and the radiator to clean
them. During these operations, make also sure that no one
is standing or working near the machine without the neces-
sary protection.
q
When working for 8 hours with a noise level exceeding 90
dBA, it is necessary to use headphones or ear plugs and be
particularly careful, especially towards the end of the work
shift.
2.2.4 UNAUTHORIZED MODIFICATIONS
q
Any modification made to the machine without the authorization of Komatsu can involve hazards.
q
Before making a modification, consult your Komatsu Dealer. Komatsu declines any responsibility for injury or
damage caused by unauthorized modifications.
RWA00960
https://tractormanualz.com