Komatsu PW98MR-10, Руководство по эксплуатации и техническому обслуживанию

Страница: 177 / 446

OTHER EQUIPMENT
METHOD FOR OPENING AND CLOSING CEILING WINDOW
k k
WARNING
When leaving the operator's seat, set the lock lever securely to LOCK position.
If the lock lever is at FREE position and the control lever, control pedal, or control switch is touched by
mistake, it is dangerous and may cause serious personal injury or death.
Opening
1.
Set the lock lever to LOCK position (L).
2.
Push up lock (A) in the front center of the ceiling window
and check that the lock is released. Then hold grip (B) and
push up the ceiling window.
Closing
Hold grip (B), lower the ceiling window, and apply lock (A). If the lock cannot be applied, “open” the ceiling win-
dow, then pull it in again and apply the lock.
METHOD FOR OPENING AND CLOSING CAB FRONT WINDOW
k k
WARNING
• When opening or closing the front window, bottom window, or door, always set the lock lever to
LOCK position.
If the lock lever is at FREE position and the control lever, control pedal, or control switch is touched
by mistake, it is dangerous and may cause serious personal injury or death.
• When opening or closing the front window, stop the machine on a level ground, lower the work
equipment to the ground, stop the engine, then perform the operation.
• To open and close the front window it is necessary to completely incline the steering column to-
wards the operator’s seat to prevent contact between the window and the steering wheel.
• When opening the front window, hold the handle securely with both hands to pull up, and do not
release your hands until the front window is locked by the automatic lock catch.
• When closing the front window, the window will move quicker under its own weight. To close it, sol-
idly grip the handle with both hands and slowly lower it, being careful not to crush your hands.
It is possible to stow the front window (upper side) in the roof of the operator's compartment.
OPERATION EXPLANATION OF COMPONENTS
3-109
WENAM00061