Komatsu PW98MR-10, Руководство по эксплуатации и техническому обслуживанию

Страница: 114 / 446

WORKING MODE SELECTOR SWITCH
Use working mode selector switch to set the movement or pow-
er of the work equipment.
The operation becomes easier by selecting the mode to match
the content of the operation.
P mode: Heavy-duty operations
E mode: For operations with emphasis on fuel consumption
L mode: For fine control operations
B mode: For breaker operations
ATT/P mode: For operations emphasizing fuel consumption out
of those of 2-way attachments like crusher (machines ready
for installation of attachment)
ATT/E mode: For operations emphasizing fuel consumption out
of those of 2-way attachments like crusher (machines ready
for installation of attachment)
• When the monitor is turned ON, it is automatically set to
the mode used when the starting switch was turned to
OFF position last.
• When the working mode selector switch is pressed, the
working mode selector screen is displayed on the monitor.
For each set mode, “P”, “E”, “L”, “B”, “ATT/P”, and “ATT/E” are displayed at the top right of the monitor dis-
play.
• For machines ready for installation of attachment, the attachment mode is added to the display.
If you want to have automatic setting of P, E, L, B, ATT/P or ATT/E mode (optional default setting) when starting
engine, ask your Komatsu distributor to change the setting.
Procedure for operation
1.
When the working mode selector switch is pressed, the
working mode selector screen is displayed on the monitor.
2.
Press function switches F3 or F4 at the bottom of the
screen or the working mode selector switch to change the
mode selection one at a time.
If no switch is touched for more than 5 seconds, the select-
ed working mode is automatically set as the working mode
and the screen changes to the one for steps 3 and 4.
REMARK
To return to the standard screen without changing the
working mode, press function switch F5.
RKA48150
EXPLANATION OF COMPONENTS OPERATION
3-46
WENAM00061