Komatsu PC300-8, Руководство по эксплуатации и техническому обслуживанию

Страница: 371 / 381

.
ATTACHMENTS AND OPTIONS
ATTACHMENT GUIDE
ATTACHMENT COMBINATIONS
WARNING
Depending on the type or combination of work equipment, there is danger that the work equipment may hit the cab or machine
body.
When using unfamiliar work equipment for the first time, check before starting if there is any danger of interference, and operate
with caution.
PC300, PC300LC
This table lists the combination of attachments which can be installed to the long arm (standard), short arm and
extension arm.
{
: Can be used
U
: Can be used only for light duty work
: Cannot be used
NOTICE
When the long arm is equipped, if the bucket is pulled in to the machine body, the arm interferes with the body. Operate the long
arm carefully.
When the boom is fully lowered during oblique digging, the boom interferes with the undercarriage. Operate the boom
carefully.
Categories of use
For general digging: Digging or loading sand, gravel, clay etc.
For light duty digging: Digging or loading dry, uncaked earth and sand, mud etc.
For loading work: Loading dry, loose earth and sand
For digging or loading hard soil or soft rock, it is recommended that the strengthened bucket with high durability
and high wear resistance be employed.
The items marked * are for when the side cutter is installed.
Name of bucket
Capacity
(m
3
)
Outside
width
(mm) Use
Standard Boom (6500 mm)
HD Boom
(6500 mm)
Standard
arm
(3.2 m)
Short
arm
(2.55 m)
Short
arm
(2.2 m)
Long
arm
(4.0 m)
HD
arm
(3.2 m)
* Narrow bucket 0.52 610 Narrow digging
{ { { {
* Narrow bucket 1.14 1,145 Narrow digging
{ { { {
* Standard bucket 1.40 1,340 General digging
{ { { U
* Light duty bucket 1.60 1,515 Loading
U U U
Light duty bucket 1.80 1,700 Loading
U U U
* Rock bucket 1.40 1,458 Digging rocks
{ { { {
Ripper bucket 0.9 950 Digging rocks
{ { { {
6 - 20