Komatsu PC300-8, Руководство по эксплуатации и техническому обслуживанию

Страница: 278 / 381

.
MAINTENANCE
MAINTENANCE SCHEDULE
MAINTENANCE SCHEDULE
If the machine is equipped with a hydraulic breaker, the maintenance schedule for some parts will be different. For
details, see "MAINTENANCE INTERVAL FOR HYDRAULIC BREAKER (PAGE 4-17)" to confirm the correct
maintenance schedule when carrying out maintenance.
MAINTENANCE SCHEDULE CHART
INITIAL 1000 HOURS MAINTENANCE (ONLY AFTER THE FIRST 1000 HOURS)
CHECK ENGINE VALVE CLEARANCE, ADJUST 4- 77
WHEN REQUIRED
CHECK, CLEAN AND REPLACE AIR CLEANER ELEMENT 4- 19
CLEAN INSIDE OF COOLING SYSTEM 4- 25
CHECK AND TIGHTEN TRACK SHOE BOLTS 4- 28
CHECK AND ADJUST TRACK TENSION 4- 29
REPLACE BUCKET TEETH (VERTICAL PIN TYPE) 4- 31
REPLACE BUCKET TEETH (HORIZONTAL PIN TYPE) 4- 34
REPLACE BUCKED SIDE CUTTER SHROUD 4- 35
ADJUST BUCKET CREARANCE 4- 37
CHECK WINDOW WASHER FLUID LEVEL, ADD FLUID 4- 38
CHECK AND MAINTENANCE AIR CONDITIONER 4- 39
WASHING WASHABLE FLOOR 4- 40
CHECK GAS SPRING 4- 43
BLEEDING AIR FROM HYDRAULIC SYSTEM 4- 44
CHECKS BEFORE STARTING
EVERY 50 HOURS MAINTENANCE
LUBRICATING 4- 47
EVERY 100 HOURS MAINTENANCE
LUBRICATING 4- 48
EVERY 250 HOURS MAINTENANCE
LUBRICATE SWING CIRCLE 4- 50
CHECK LEVEL OF BATTERY ELECTROLYTE 4- 50
CHECK AIR CONDITIONER COMPRESSOR BELT TENSION, ADJUST 4- 52
EVERY 500 HOURS MAINTENANCE
REPLACE FUEL PRE-FILTER CARTRIDGE 4- 53
CHECK SWING PINION GREASE LEVEL, ADD GREASE 4- 56
CHECK OIL LEVEL IN SWING MACHINERY CASE, ADD OIL 4- 57
CHECK OIL LEVEL IN FINAL DRIVE CASE, ADD OIL 4- 58
CHANGE OIL IN ENGINE OIL PAN, REPLACE ENGINE OIL FILTER CARTRIDGE 4- 59
CLEAN AND INSPECT RADIATOR FINS, OIL COOLER FINS, AFTER COOLER FIN AND
CONDENSER FINS
4- 61
CLEAN AIR CONDITIONER FRESH/RECIRC FILTERS 4- 63
REPLACE BREATHER ELEMENT IN HYDRAULIC TANK 4- 64
REPLACE HYDRAULIC TANK ADDITIONAL BREATHER ELEMENT 4- 65
4 - 15