Komatsu PC110R-1, Руководство по эксплуатации и техническому обслуживанию

Страница: 98 / 212

96
USE OF THE MACHINE
3.6.1.3 OPERATIONAL CHECKS
DANGER
•
All the checks must be carried out by the operator while
seated, with fastened safety belt.
•
If the machine has been stopped after use or in order to
carry out maintenance operations, the safety devices may
have been disconnected; when the operator gets on the
cab, he must make sure that all the safety locks of the
equipment controls are in the correct position and there-
fore that the equipment cannot move suddenly and cause
accidents.
The checks concern:
1 - the locking of the safety device;
2 - the accelerator idling position;
3 - the neutral position of the controls.
The following check is carried out by turning the ignition key to po-
sition “I” to apply voltage to the control panel and check the func-
tionality of the acoustic alarm, fuel level indicator and the engine
oil pressure, generator and preheating warning lights.
RWA01960