Komatsu PC110R-1, Руководство по эксплуатации и техническому обслуживанию

Страница: 41 / 212

TRANSPORTING THE MACHINE ON OTHER VEHICLES
39
2.5 TRANSPORTING THE MACHINE ON OTHER VEHICLES
2.5.1 LOADING AND UNLOADING THE
MACHINE
2.5.2 SHIPPING
Ramps
Blocks
Blocks
RWA00240
Max.15˚
•
Loading and unloading the machine on/from another vehicle al-
ways involve potential hazards. Proceed with extreme care.
•
Perform loading and unloading on firm, level ground. Maintain a
safety distance from the edges of ditches or from road sides.
•
If the vehicles used have not been appositely equipped, put
support blocks under the ramps, in order to avoid any bending.
•
Always lock the wheels of the transporting vehicle with wedges.
•
Always use ramps that are sufficiently wide and can support the
weight of the machine. The longitudinal axes of the ramps must
be parallel to each other and perpendicular to the loading side
board and their distance must be suitable for the tread of the
machine.
•
Make sure that the ramps are securely positioned and anchored
to the loading board and that they have the same length.
•
Position the ramps with a maximum inclination of 15°.
•
Make sure that the ramp surface is clean and there is no trace
of grease, oil, soil and ice; remove dirt from the tracks before
starting to load the machine on the vehicle.
•
The machine must be loaded on the vehicle with the bucket di-
rected forwards, that is, in the direction of advancement of the
vehicle.
•
Do not correct the trajectory of the machine on the ramps. If
necessary, get down the ramps and start the operation again.
•
After loading the machine, block the tracks with wedges and se-
cure it with tie-downs or chains that prevent even any sideward
shift (see “3.9 TRANSPORTING THE MACHINE ON OTHER
VEHICLES”).
•
Define the route to be followed, taking into account the width, height and weight of the transporting vehicle plus
the machine.
Make sure that the overall dimensions of the vehicle and load are compatible with the roads and any tunnel, un-
derpass, bridge, power and telephone line, etc. along the route.
•
Keep to the regulations in force regarding the permissible width, height, weight and speed of heavy vehicles.