Komatsu D61EX-24, Руководство по эксплуатации и техническому обслуживанию, Страница: 249 / 435

REMARK
• When engine starting switch (2) is turned to OFF posi-
tion, the engine stops, but the machine's main power
supply is not turned off immediately.
During this period, the power is supplied to the con-
troller to save the operating condition and then finish
the system. The time to keep supplying the power de-
pends on the operating condition.
• Also when the cooling fan is turned in reverse, the ma-
chine's main power supply is not turned off immediate-
ly, even if the key in engine starting switch (2) is
turned to OFF position.
This is for protection of the hydraulic circuit, and the
power is kept supplied for 7 seconds.
• If the starting switch (2) key is turned to OFF position
(A) while the engine is still hot, guidance (3) may be
displayed on the machine monitor. To cool down the
engine before stopping, run it at low idle the next time
and after, because it may cause damage to the devi-
ces.
• After the engine is stopped, DEF in DEF injector and
pump is automatically purged and returned to the tank
to prevent malfunction of the devices caused by freez-
ing of DEF or deposition of urea.
For this purpose, the devices keep operating for sev-
eral minutes after starting switch (2) is turned to OFF
position, and this does not indicate abnormality.
In addition, the system operating lamp lights up while
devices are operating to purge DEF to the tank. Do
not turn the battery disconnect switch to OFF position
while the system operating lamp is lit. After all DEF is
purged, the devices stop automatically.
MACHINE OPERATIONS AND CONTROLS OPERATION
3-198