Komatsu D61EX-24, Руководство по эксплуатации и техническому обслуживанию, Страница: 129 / 435

MAINTENANCE SCREEN SETTING
Each item of setting menu (e) on “Maintenance” screen is used
for displaying and setting the notification relevant to mainte-
nance.
The items on the “maintenance” display are as follows.
A B
Air Cleaner Cleaning or Change -
Coolant Change -
Fuel Prefilter Change 500
Engine Oil Change 500
Engine Oil Filter Change 500
Fuel Main Filter Change 1000
Final Drive Case Oil Change 1000
Hyd Oil Tank Breather Change 1000
Fuel Tank Breather Change 1000
DEF Tank Breather Change 1000
Hydraulic Oil Filter Change 2000
Hydraulic Oil Change 2000
HST Oil Filter Change 2000
KCCV Filter Change 2000
DEF Filter Change 2000
DEF Tank Washing 4500
A: Maintenance item
B: Default maintenance interval settings (h)
C: Time remaining until maintenance (h)
On “Maintenance” screen, it is possible to perform the following operations with switches F1 to F6.
F1, F2: Moves to the right and left menus.
F3: Moves to the next item (1 line below). When on the last line, it moves to the first line.
F4: Moves to the previous item (1 line above). When on the first line, it moves to the last line.
F5: Returns the screen to the standard screen.
F6: If this switch is kept pressed, the screen changes to the screen for resetting the remaining time to the main-
tenance for the selected item.
REMARK
When resetting the remaining time to the maintenance, keep switch F6 pressed for at least 1.5 seconds. If this
time is short, the switch operating sound can be heard, but the screen does not switch to the screen for reset-
ting the remaining time to the maintenance.
• If no switch is operated for 30 seconds on “Maintenance” screen, the screen automatically returns to the
standard screen.
• When the maintenance time caution lamp is lit on the standard screen, press switch F6 on the standard
screen and the screen automatically displays “Maintenance” screen.
• On “Maintenance” screen, if the time remaining to the maintenance for any item is less than 30 hours (initial
setting value), the remaining time display (c) is highlighted in yellow. If the time remaining to the mainte-
nance is less than 0 hours, display (c) is highlighted in red.
EXPLANATION OF COMPONENTS OPERATION
3-78