Komatsu D61EX-24 Скачать руководство пользователя страница 159 | Manualshive

Страница: 159 / 435

Komatsu D61EX-24 Скачать руководство пользователя страница 159

Insert the key as far as it will go to the shoulder (A) and turn it.
If the key is turned when it is not inserted all the way to the
end, it may break.

CUP HOLDER

This is for keeping a beverage can, cup, etc.
If you put them on the other place than cup holder, they will fall
down and remaining liquid inside may get around part or ma-
chine dirty.
Use it for keeping a beverage can, cup, etc. with liquid inside.

ASHTRAY

NOTICE
While removing the ashtray, if it is stuck in the console cover and hard to be removed, open the lid of
ashtray, and then hold the ashtray body and twist it right and left to remove.
If you hold the lid of ashtray and twist it, the ashtray may break.

This is on the left side of the operator's seat.
Always extinguish your cigarette before putting it in the ashtray,
and be sure to close the lid.

LUNCH BOX FIXING BELT

This is the place for lunch box.
Fix the lunch box with belt.
This can be used for other things than lunch box. Make efficient
use of this.

EXPLANATION OF COMPONENTS

OPERATION

3-108

«
...
157
158
159
160
161
...
»

Содержание D61EX-24




















































































































































































































































































































































































































































Отзывы:

Нет отзывов