Kolver EDU 2AE/TOP/MITO, Руководство пользователя

Страница: 8 / 24

Manual EDU 2AE/TOP/MITO Page 8
28) Ang. min – Minimum angle:
Minimum angle threshold. You can set it if T&A is set on Tor, T/in or
T/lv (see T&A specific instructions). The minimum angle the operator can set is 5°.
29)Ang. max - Maximum angle:
Maximum angle threshold. You can set it if T&A is set on Tor, T/in or
T/lv (see T&A specific instructions). The maximum angle the operator can set is 9720°.
If T&A is set on Ang., A/in or A/lv mode, maximum angle corresponds to the angle that has to be carried
out.
SEQUENCE MENU:
- - - S E Q U E N C E - M E N U - - - -
O K c h a n g e E S C q u i T
 1 ) S e q s e t : 1 4 7 3 9 8 1 2
2 ) S e q u e n c e : O F F
1) Seq set:
you can set a sequence up to max. 8 programs. To set the next program in the sequence, press
OK.
2) Sequence:
It allows to enable or disable the sequence. ON = enabled; OFF = disabled.
- - - S E Q U E N C E - M E N U - - - -
3 ) E x t b o x : O F F
 4 ) M o d . b a r c : O F F
5 ) R e s . a u t s e q : O F F
3) Ext box:
It allows to enable or disable the external switch box. ON = switch box enabled; OFF = switch
box disabled.
4) Barc. mode: – Barcode mode
: It allows to choose the barcode mode.

OFF:
barcode disabled.

ON prog:
you can select the program to be executed by scanning the bar code of the product. The
unit compares the scanned code to the one previously entered in each program (see point 25: Barc.
Set.). If the two codes are the same as the program is loaded, otherwise it will appear Error
Barcode. The scanned product code is also printed on the serial port of the control unit (see
paragraph “ serial print ”) .

ON S.N.:
the product code is required before carrying out a cycle or a sequence. The product code
is printed on the serial port of the control unit.
5) Aut. res seq:
If ON, the control unit automatically resets after the end of the sequence. If OFF it is
necessary to press OK at the end of each sequence.
OPTION MENU:
- - - - O P T I O N - - M E N U - - - -
O K c h a n g e E S C q u i t

1 ) L a n g u a g e : I T
2 ) C h a n g e p a s s w o r d