Kolin KAM-75BMC Скачать руководство пользователя страница 5

To prevent injury to the user or other people and property damage, the following instructions 
must be followed. Incorrect operation due to ignoring of instructions may cause harm or damage. 
The seriousness is classified by the following indications.

SAFETY PRECAUTIONS

This symbol indicates the possibility of death or serious injury.

Meanings of symbols used in this manual are as shown below.

!

!

WARNING

Always do this.

Never do this.

!

CAUTION

This symbol indicates the possibility of injury or damage to property.

Plug in power plug 
properly.

Do not modify power cord
length or share the outlet
with other appliances. 

Always ensure effective
earthing.

Unplug the unit if strange
sounds, smell, or smoke
comes from it.

Ventilate room before operating air
conditioner if there is a gas leakage from
another appliance.

   Otherwise, it may cause electric
   shock or fire due to excess heat 
   generation.

  It may cause electric shock or 
  fire due to heat generation.

  Incorrect earthing may cause 
  electric shock.

  It may cause fire and electric
  shock.

  It may cause explosion, fire and, burns.

  It may cause electric shock or fire
  due to heat generation.

  It may cause electric shock.

  It may cause failure of machine
  or electric shock.

  It may cause fire and electric 
  shock.

  It may cause fire and electric 
  shock.

  It may cause electric shock or fire.
  If the power cord is damaged, it 
  must be replaced by the manufac-
  turer or an authorised service 
  centre or a similarly qualified per-
  son in order to avoid a hazard.

  This could damage your health.

  Incorrect installation may cause 
  fire and electric shock.

  It may cause electric shock.

   It may cause an explosion or fire.

  It may cause failure and electric shock.

Do not operate or stop the
unit by inserting or pulling 
out the power plug.

Do not operate with wet
hands or in damp 
environment.

Do not allow water to run
into electric parts.

Do not use the socket if it is
loose or damaged.

Do not use the power cord
close to heating appliances.

Do not damage or use an 
unspecified power cord.

Do not direct airflow at 
room occupants only.

Always install circuit
breaker and a dedicated
power circuit.

Do not open the unit
during operation.

Do not use the power cord near 
flammable gas or combustibles, such
as gasoline, benzene, thinner, etc.

Do not disassemble or modify unit.

!!

!!

!!

!!

!!

WARNING

!

Leave the door closed 
while the air conditioner
is running.

  It is not designed to cool the 
  entire house.

!!

1

1

Содержание KAM-75BMC




















Отзывы: