
8
8
To meet different requirement of different type of air conditioner,t herea re threek inds o f m ethods
for your choice to treat the condensed water.
Drainage
1. Remove the rubber plug from the bottom of the cabinet and
attach to the back drain hole (on some models the rubber
plug provided with your air conditioner accessory). For the
units without the bottom rubber plug and the back drain hole,
just install the drain tray.
2. Take out the drain tray and screws (which provided with
your air conditioner accessory).
3. Install the drain tray at the bottom of the unit and secure with
screws provided.
4. Connect the drain hose to the outlet located at one side of the
drain tray. You can purchase the drain hose or tubing locally to
satisfy your particular needs (Drain hose is not supplied).
Suggestion: To ensure the condensed water drain off smoothly, always keep the drain oulet of the
the drain tray downward when install the drain tray.
When cooling or heating,you can choose bottom drainage ,
See the following procedures to perform bottom drainage:
RUBBER
PLUG
SCREW
DRAIN PAN
DRAIN
OUTLET
Note:
When you choice bottom drainage the air conditioner will effect cooling efficiency little and
have no voice of hit water.
When cooling you can choose back drainage (on models
with back drain hole).
See the following procedures to perform back drainage:
1. Fit the seal onto the drain joint (which provided with
your air conditioner accessory).
2. Remove the rubber plug from the back of the unit.
(If applicable),and insert the rubber plug(which
provided with your air conditioner accessory on
some models) into the bottom drain hole of the unit.
3. Attach the drain joint to the back of the cabinet
O
where you remove the plug and rotate 90 to
securely assemble them.
SEAL
DRAIN
JOINT
RUBBER
PLUG
4. Connect the drain joint with a extension drain hose
(Locally purchased)
Note:
When you choice back drainage the air conditioner will make a voice of hit water.
Note:
If you choose non-drainage when cooling,both the bottom and the back drain holes of the unit
should be inserted with rubber plugs.
When you choice non-drainage the air conditioner will be
perfect cooling efficiency, but the unit will make a big voice of hit water. Does not recommend
to use.
Note:
Cooling efficiency of the unit is tested under hit water.