45
Pt 1: is the first point in this line, the user can choose an arbitrary point.
Pt 2: is the end point in this line, it should be an arbitrary point which can makes this line
into correct order. The order of Pt 1 to Pt 2 should be accordance with the line.
Pt 1 Ht/ Pt 2 Ht is the height for these two points. The height should be input by manual.
Press [OK] to calculate the closure error and check the result. If it is over-range, the
equipment will show it on screen
St Closure Err:
the closure error in each
station
Adj Method:
the adjustment method, for
example by distance or by station
[Adj]:
Adjustment. Calculate and record each
points in this line.
Pt N: Press [
←
][
→
] to check all the adjusted
point
Residual: the difference between the adjusted
height and original height
All the adjust result will be saved after the measured data. It will add a new data block with
the height for all new points, after adjustment in each time.
