91
12.3 Point to Line Measurement
This mode is used to obtain the coordinate data of an unknown occupied point from a
known point and a known line. An observation will need to be taken at the known point
A(0,0,0) and along the line N designated for the example as B. After measuring the 2 points the
coordinate and the direction angle of the instrument will be calculated and recorded.
②
Input Point name and prism
height, then press Dist. key to
get the result
F3
③
Press F4 (OK) key to
complete the measurement of
first point
F4
④
Repeat step
①
to
③
to
measure several points, it can
calculate automatically and
show the result once meet the
calculation condition, also can
check and save the result
Содержание CTS-632R10M
Страница 9: ...4 Object Lens Battery EDM Trigger Key Horizontal Tangent Unit Circular Vial...
Страница 58: ...53 Press F4 coordinate key F4 Input the end point continue to measure To return to Menu press the ESC key...
Страница 78: ...73 10 5 Point Projection Measure 2 starting points P1 and P2 to define a straight line at first then measure a...
Страница 79: ...74 11 PROGRAM Normal measurement mode MENU 4...
