8
English
PARTS LIST
1
Tool socket
4
Power cord
7
Silcone beater
2
Lift lever
5
Mixing bowl
8
Whisk
3
Speed control knob
6
Dough hook
9
Splash cover
BEFORE FIRST USE
All parts of the stand mixer should be cleaned before being used for the first time (see section:
”CARE & CLEANING”).
USING THE MIXING BOWL
1.
In order to lift the arm, clockwise rotation the lift lever (2). The arm will now move upwards.
[Fig. 1]
2.
Place the splash cover (9) into its body and turn the splash cover until it locks into place. [Fig. 2]
3.
Place the mixing bowl (5) into its holding device (A) and turn the bowl clockwise until it locks
into place (B). [Fig. 3]
4.
Mount the required tool (dough hook (6) or silicone beater (7) or whisk (8)) by inserting
the top into the tool socket and turn counterclockwise until it locks into place. [Fig. 4 & Fig. 5]
5.
Now fill in your ingredients.
WARNING
: Do not overfill the machine - the maximum quantity of ingredients is 1.5kg.
6.
Lower the arm using the lift lever (2). [Fig. 6]
7.
Insert the mains plug into a power socket.
8.
Switch the machine using the speed control knob (3) to a speed between 1 and 6 (according
to the mixture).
9.
For pulse operation (kneading at short intervals), turn the speed control knob (3) to the P
position. The speed control knob (3) has to be held in this position according to the desired
