6
3. Machine data
3.1 Manufacturer
Paul KOLBE GmbH
FOODTEC
Gewerbestraße 5
D-89275 Elchingen
3.2 Designation
Mixer mincer machine with
Enterprise or Unger cutting system
3.3 Product number
Type MWK32-45 / MWK114-45
Type MWK32-80 / MWK114-80
Type MW32-80 / MW114-80
3.4 Performance data
Type MWK32-45
Cutting system
Enterprise E32
Perforated disc diameter
100 mm
Hopper volume
45 Ltr
Output capacity with 3 mm perforated
disc approx.
950 Kg/h
Main drive motor / IP55
3,0 kW
Mixer drive motor / IP55
0,37 kW
Type MWK114-45
Cutting system
Unger D114
Perforated disc diameter
114 mm
Hopper volume
45 Ltr
Output capacity with 3 mm perforated
disc approx.
950 Kg/h
Main drive motor / IP55
4,0 kW
Mixer drive motor / IP55
0,37 kW
Type MWK32-80
Cutting system
Enterprise E32
Perforated disc diameter
100 mm
Hopper volume
80 Ltr
Output capacity with 3 mm perforated
disc approx.
1050 Kg/h
Main drive motor / IP55
Optional
3,0 kW
4,0 kW
Mixer drive motor / IP55
0,75 kW
Type MWK114-80
Cutting system
Unger D114
Perforated disc diameter
114 mm
Hopper volume
80 Ltr
Output capacity with 3 mm perforated
disc approx.
1050 Kg/h
Main drive motor / IP55
4,0 kW
Mixer drive motor / IP55
0,75 kW
Type MW32-80
Cutting system
Enterprise E32
Perforated disc diameter
100 mm
Hopper volume
80 Ltr
Output capacity with 3 mm perforated
disc approx.
1300 Kg/h
Main drive motor / IP55
5,5 kW
Mixer drive motor / IP55
0,75 kW
Type MW114-80
Cutting system
Unger D114
Perforated disc diameter
114 mm
Hopper volume
80 Ltr
Output capacity with 3 mm perforated
disc approx.
1300 Kg/h
Main drive motor / IP55
5,5 kW
Mixer drive motor / IP55
0,75 kW
Each KOLBE product is subject to a thorough acceptance
test run prior to shipping, whereby all functions and
safety equipment are checked and documented.
4. Delivery
For delivery, the machine will be bolted onto a wood
pallet and shrink-wrapped in polyethylene protective film.
Machine accessories, such as adjustable machine feet, fixed
and steering castors, combination hook wrench, splatter
guard, KOLBE mincer plunger, Operating Manual, etc., are
delivered in an accompanying carton.
(We use reusable and recyclable packaging exclusively.)
Please inform us or the delivery company immediately if the
delivered contents do not agree with the packing list.
In the event of transport damage, contact the transport
company immediately for claims assessment.
5. Installation of the machine
5.1 Installation instructions
Remove the shrink-wrapped foil and dismantle the machine
from the shipping pallet by removing the four bolts. Carefully
lift the machine with a forklift or crane apparatus and
remove the wood pallet. Bolt the four adjustable machine
feet (69) supplied to the threaded holes in the machine
legs or, depending on the mobile machine model, mount
the two rear fixed castors (8) and the two forward steering
castors (9). The adjustable machine feet are set accordingly
by means of the screw threads to compensate for uneven
floor surfaces.
The installation site must be selected based on load bearing
capacity of the foundation or floor covering with respect to
the weight of the machine.
Kolbe meat processing machinery are to a certain extent
dangerous machines, and may therefore only be installed