5
1. Components and Confi guration
Ascending Colon for Colonoscopy parts
Descending Colon for Colonoscopy parts
Common parts
⑥ Left ⑦ Right
- 2 -
♦ Descending Colon for Colonoscopy parts
♦ Common parts
[6] Left; [7] Right
Name
Quantity
① Ascending Colon for Colonoscopy
1
② Spacers for pins 16 mm
2
③ Descending Colon for Colonoscopy
1
④ Spacers for pins 10 mm
2
⑤ Simulated polyp attachment band
1
⑥ Sessile polyp for observation
1
⑦ Pedunculated polyp for observation
1
⑧ Velcro with double-faced adhesive tape
2
‒ Instruction Manual (this booklet)
1
P.5
2. Handling Methods
2-1 Changing parts of the intestinal tract
2-1-1 How to change Ascending Colon for Colonoscopy
1)
Remove the round stoppers for the simulated peritoneal membrane sheet, small
intestine, and intestinal sheet.
2)
Remove screws from the transparent cover and lift off the cover.
3)
Insert the small intestine through the opening in the intestinal sheet, and then
turn over the sheet.
P.6
4)
Remove the two screws affixing the ascending colon to the main unit, using a
screwdriver. *A screwdriver is not included with the product.
5)
Remove the ascending colon. Install the provided spacers for pins (16 mm) to the
above two screws, and tighten the screws at the two points shown in the
illustration, below.
* For the rest of this document, the two screws will be referred to as “pins.”
Spacers for pins (16 mm)
6)
Connect the ascending colon to the transverse colon.
Ascending colon and transverse colon
P7
Make sure to align marks on each connector
Male Female
7)
As shown below, push holes in the ascending colon’s seat into the pins to attach
the ascending colon to the main unit.
