17
2-4 Attaching simulated polyps (for polypectomies)
[Caution]
Be sure to disconnect the conduction cable from the model when not using (attaching) any
simulated polyp (for polypectomies) in order to avoid any electrical hazards.
1) Attach the plate side of the conduction cable to the Velcro on the back of the main unit. When
using simulated polyps (for polypectomies) in both the ascending and descending colons, you
should attach the two plates side-by-side to the Velcro on the back of the main unit as shown in
the lower right illustration below.
* Note that only one conduction cable is included with this product. Extra conduction cables are
available as optional accessories if needed for the use of simulated polyps (for polypectomies) in
both the ascending and descending colons.
2) Attach a return electrode which you might have to cover the plate of the conduction cable.
When using simulated polyps (for polypectomies) in both the ascending and descending colons,
you should attach the return electrode so that it is in contact with the two plates as shown in the
lower illustrations below.
* When using a dual-type return electrode, attach it so both surfaces are in contact with the plate.
Velcro
plate side of the
conduction cable
Using one conduction cable
Using two conduction cables
Using one conduction cable
Using two conduction cables
