7
5) Roll down the end of the umbilical cord connector with a clip until the clip is visible, then
clamp it onto the umbilical cord contained in this Umbilical Cord Kit. After clamping them
together, unfold the end of the umbilical cord connector and onto the umbilical cord
contained in this Umbilical Cord Kit.
* If the end of the umbilical cord contained in this Umbilical Cord Kit is not covered by the
umbilical cord connector, they may come apart.
6) Assembly is now complete. To re-attach the umbilical cord contained in this Umbilical Cord
Kit after it is cut off, start the procedure again from step 5.
* Apply adequate glycerin to the fetal model and placenta model as well as to the inside of the
vulva when practicing delivery.
Clip