Kohler KD 626/3, Руководство по ремонту

Страница: 9 / 106

- 9 -
1
GENERAL SAFETY DURING OPERATING PHASES
– The procedures contained in this manual have been
tested and selected by the manufacturer’s technical
experts, and hence are to be recognised as authorised
operating methods.
– Some tools are normal workshop ones, while others are
special tools designed by the Manufacturer of the engine.
– All tools must be in good working condition so that engine
components are not damaged and that operations are
carried out properly and safely.
– It is important to wear the personal safety devices
prescribed by work safety laws and also by the standards
of this manual.
– Holes must be lined up methodically and with the aid of
suitable equipment. Do not use your fingers to carry out
this operation to avoid the risk of amputation.
SAFETY AND ENVIRONMENTAL IMPACT
Every organisation has a duty to implement procedures to
identify, assess and monitor the influence of its own activities
(products, services, etc.) on the environment.
Procedures for identifying the extent of the impact on the envi-
ronment must consider the following factors:
-
Liquid waste;
- Waste management;
- Soil contamination;
- Atmospheric emissions;
-
Use of raw materials and natural resources;
- Regulations and directives regarding environmental impact.
In order to minimise the impact on the environment, the manufac-
turer now provides a number of indications to be followed by all
persons handling the engine, for any reason, during its expected
lifetime.
- All packaging components must be disposed of in accordance
with the laws of the country in which disposal is taking place.
- Keep the fuel and engine control systems and the exhaust
pipes in efficient working order to limit environmental and noise
pollution.
-
When discontinuing use of the engine, select all components
according to their chemical characteristics and dispose of them
separately.
– Some phases may require the assistance of more than
one operator. If so, it is important to inform and train them
regarding the type of activity they will be performing in
order to prevent risks to the health and safety of all persons
involved.
– Do not use flammable liquids (petrol, diesel, etc.) to
degrease or wash components. Use special products.
– Use the oils and greases recommended by the manufacturer.
Do not mix different brands or combine oils with different
characteristics.
– Discontinue use of the engine if any irregularities arise,
particularly in the case of unusual vibrations.
– Do not tamper with any devices to alter the level of
performance guaranteed by the manufacturer.
. Take care when removing the oil filter as it may be hot.
. The operations of checking, filling up and replacing the
cooling liquid must be carried out with the engine turned off
and cold. Take particular care if liquids containing nitrites
are mixed with others not containing these compounds
as this may give rise to the formation of nitrosamines
which are a health hazard. The cooling liquid is polluting,
so dispose of in a manner that does not damage the
environment.
. In order to move the engine simultaneously use the
eyebolts fitted for this purpose by Kohler . These lifting
points are however not suitable for the entire machine, so
in this case use the eyebolts fitted by the manufacturer.
General remarks and safety information
KD Workshop Manual_cod. ED0053029350_
1° ed
_ rev.
00