Kohler K-97260X, Руководство по установке и эксплуатации

Страница: 3 / 24

Tools
Before You Begin
Product Requirement
CAUTION : Risk of product damage. Do not lift the bath by the piping or pump, or use the piping or pump
for structural support of the bath.
□ We recommend this bath for drop-in.
□ Inspect the bath for damage before you begin installation.
□ You must install this bath to an adequately supported, level subfloor.
□ Confirm adequate support for a rim-mounted faucet, large faucets that may be inadvertently used as a means
of support are not appropriate or safe for this installation.
Plus:
• Conventional woodworking or
concrete installation tools and materials
• Drop cloth
Silicone Sealant Measuring Tape Level Pencil
Pipe Wrench Safety Glasses
A. Summary of Key Requirements
□ Observe all local plumbing codes.
□ Install the unit to a level subfloor.
□ Provide properly-dimensioned framing.
B. Plumbing Specifications
If using a rim-mounted bath faucet, flexible connections between the valves and spout may be required. Confirm
adequate mounting, connection space of specified faucet for your installation.
C. Product Inspection
Carefully unpack and inspect the bath with airjets for damage. Leave all materials in the carton during constructions
to prevent damage.
D. Electrical Requirements
The installation must have a Earth-Leakage Circuit-Breaker (ELCB). The ELCB protects against Line-to-ground
shock hazard. Use a 220-240 V, 20 A (minimum), 50/60 Hz dedicated service for the bath with airjets.
E. Connections and Service Access
Before installation, ensure proper access to the final connections.
NOTICE : Provide generous, unrestricted service access to the pump. You must provide access for servicing
the pump and controls. The access must be located immediately next to the pump. Study the roughing-in
information packed with the whirlpool (the size of access panel should not less than 500 x 450 mm).
Kohler Co. 3 1241693-X2-B