3. Install the Valve - Bath/Shower Application
NOTE:
For installations that use a bath diverter spout and a
showerhead, install a twin ell (K-9663) between the valve and the
spout.
Install the valve on the support framing so the
″
UP
″
mark on the
valve is facing downward.
If the hot water supply is connected to the cold inlet, the cap
assembly must be rotated 180° to ensure proper orientation; see
the enlarged view showing the cap rotated 180°.
Install elbows and adapters (if needed) to 3/4
″
copper tubing of
the proper length. Apply thread sealant, and connect the piping
to the bath and shower outlets of the valve.
This feature faces downward
for bath/shower installation.
To
Showerhead
Cold Inlet
Cold
Supply
Hot
Inlet
10"
(25.4 cm)
To Spout
Twin
Ell
Hot
Supply
1150733-2-A
6
Kohler Co.
