2. Install the Brackets
Measure and mark 34-1/4
″
(87 cm) from the floor.
For K-18598 and K-18599:
Using a level, draw a 48
″
(121.9 cm) horizontal line through the
marked height. This will be the horizontal position where the
vanity will slide onto the brackets.
For K-18597:
Using a level, draw a 24
″
(61 cm) horizontal line through the
marked height. This will be the horizontal position of the bottom
of the vanity.
For All Installations:
NOTE:
The length of each bracket is 5
″
(12.7 cm).
Mark a point 7/8
″
(2.2 cm) in from the edge of each end of the
marked line.
Mark a 5
″
(12.7 cm) plumb line down from the previous marked
point. This will be the plumb line for the outermost edge of each
bracket.
NOTE:
The brackets provided have a left and right side. Ensure that
you are aligning the correct bracket before marking its location.
Marked Length of
Vanity: 24" (61 cm)
or 48" (121.9 cm)
34-1/4"
(87 cm)
7/8" (2.2 cm)
5" (12.7 cm)
5" (12.7 cm)
Plumb Line
Finished Wall
Verify brackets are
level after mounting.
Finished
Wall
Kohler Co.
5
1055673-2-B