4. Install the Vanity
CAUTION: Risk of personal injury.
Do not attempt to lift the
vanity into place without assistance.
Lift and slide the vanity or vanities over the brackets.
Ensure the back of the vanity is flush against the finished wall
and the brackets are properly positioned underneath the vanity.
From the underside of the vanity, secure the brackets to the
vanity with the washers and screws provided. Use a flashlight to
assist you.
If a Lavatory/Vessel Will NOT Be Installed:
Attach bumpers (provided) to the top left and top right corners of
the backside of the drawer/lid face. Reinstall the drawer. To
properly reinstall the drawer, refer to the
″
Remove/Adjust the
Drawer
″
section.
If a Lavatory/Vessel Will Be Installed:
Proceed to the
″
Prepare for the Lavatory Installation
″
section to
install a lavatory or vessel.
Screw
Washer
Bracket
Access Holes
Finished Wall
Underside of Vanity
Vanity
1055673-2-B
8
Kohler Co.