Thank You For Choosing Kohler Company
We appreciate your commitment to Kohler quality. Please take a few
minutes to review this manual before you start installation. If you
encounter any installation or performance problems, please don’t
hesitate to contact us. Our phone numbers and website are listed on
the back cover. Thanks again for choosing Kohler Company.
Tools and Materials
Before You Begin
IMPORTANT!
The dimensions stated in this installation guide are
for a 36
″
(91.4 cm) vanity height, which is standard countertop
height. If an alternate height is desired, you must calculate your
own measurements for backing material height and bracket height.
Observe all local building codes.
Unpack the new product and inspect it for damage.
Assistance is recommended to successfully install the product.
If a lavatory/vessel will be installed, install the water supply and
drain lines before installing the vanity. Refer to the roughing-in
information included in the lavatory installation guide to properly
position the water supply and drain lines with the vanity
cutout/vessel location.
To properly support the vanity, 2x12 backing material must be
used in the finished wall.
Make sure the finished wall is straight and plumb, and the floor
is flat and perpendicular to the finished wall.
Select lag bolts according to your finished wall thickness and
rated with a minimum of 300 lbs (136.08 kg) load bearing.
Measuring
Tape
Pencil
Level
Drill
2x12 Lumber
Plus:
• Socket Wrenches with Sockets
• Lag Bolts 5/16" x 2-1/2"
• Flat Washers 5/16" ID
• Framing Nails
• Finishing Nails
• Bracket Screws
• Connection Screws 1-1/4"
• Flashlight
• Wood Shims
• C-Clamp and Soft Cloth
• 2x4 Lumber (optional)
Safety
Glasses
Assorted
Screwdrivers
1055673-2-B
2
Kohler Co.
