3
B. Electrical Requirements
'
'
'
'
The installation must have two Class A Ground-Fault
Circuit-Interrupters (GFCI s) or Earth-Leakage Circuit-
Breakers (ELCB s). The GFCI s or ELCB s protect
against line-to-ground shock hazard.
Do not relocate
the whirlpool pumps, or make other modifications
to the whirlpool system, as this could adversely
affect the performance and safe operation of the
whirlpool. Kohler Co. shall not be liable under its
warranty or otherwise for personal injury or
damage caused by any such unauthorized
modification.
Use two 220-240
V, 20 A, 50/60 Hz dedicated services; one for each
pump/control/heater system.
WARNING: Unauthorized modification may
cause unsafe operation and poor
performance of the whirlpool.
Product Notices
B.
A
(GFCI)
(ELCB)
GFCI
ELCB
2
220/240
20
50/60
/
/
C. Connections and Service Access
Before installation, ensure proper access to the final
connections.
You must provide a minimum of
three 864mm wide x 381mm high access panels for
servicing the pumps and controls. The access must be
located immediately next to the pumps. Study the
roughing-in information packed with the whirlpool.
NOTICE: Provide generous, unrestricted service
access to the pumps.
C.
3
864mm
381mm
TOOLS AND MATERIALS
TOOLS AND MATERIALS
Plus:
·
·
·
·
·
·
·
·
Conventional woodworking tools and materials
Drop Cloth
Cement, mortar or construction adhesive
2x4 wood boards
2x4
Silicone Sealant
Measuring Tape
Pencil
Tin Snips
Safety Glasses
Pipe Wrench
Level
1141609-T01-A