Kohler GM77177-KP1-QS, Руководство по установке

Страница: 9 / 20

TT-1574 1/12 9
NOTES:
D
See the generator set Installation Manual for terminal block location on
generator set. Check the decal on the generator set for terminal block
connections.
D
See Figure 12 for maximum total cable length per run (3 runs with 1 module
each shown).
D
See Figure 13 for communication connection detail (A and B, PWR and
COM).
D
Use splices or wire nuts to collect multiple leads for connection to the
generator set terminal block. See Figure 16.
1. Belden #9402 or equivalent, 20 AWG shielded cable with 2 twisted pairs
tp6803
PIM
LCM
RXT ATS
Generator Set
TB1
1
1
1
Figure 15 Accessory Module Connections, Star Configuration (three cable runs with one module each)
1
tp6803
1. Splice
Generator Set
Generator Set Terminal Block TB1.
See the generator set Installation Manual for location.
Check the decal on the generator set for terminal block connections.
COM
PWR
B
A
Connect all of the shield leads on this
end to GROUND at the generator set.
COM
PWR
B
A
To GROUND
9402 CABLE
9402 CABLE
A
B
COM
PWR
3
4
TB1
RBUS
12 VDC
GND
Figure 16 Multiple Connections to the Generator Set