Electrical Installation (cont.)
¨
Insert the wall embedded cable
through side entry “A” and lead
the cable to cable bracket “B”.
¨
Connect the cable as following:
¨
Clamp the cable to the correct position. Check if the wiring connection
is correct and replace the cover.
When reinstalling the front cover, please take note of the procedure shown
below:
¨
Ensure the position is correct, turn the VR shaft to OFF position (at the heater
base).
¨
Install the front cover, turn the temperature control knob to OFF position
to align with the VR shaft. (at the front cover).
¨
Press the upper part of the front of cover until it locks. Ensure the temperature
control knob fix properly and screw the front cover to the heater base.
BROWN or RED --LIVE (L)
BLUE or BLACK --NEUTRAL (N)
GREEN or GREEN/YELLOW --EARTH ( )
A
B
This Position
This Position
GREEN or GREEN/YELLOW
BROWN or RED
BLUE or BLACK
Kohler Co.
13 1237889-X2-G
Содержание Englefield K-5627X
Страница 34: ...1237889 X2 G 34 Kohler Co ...
Страница 35: ...Kohler Co 35 1237889 X2 G ...
