7.3
Section 7
Retractable Starter
7
Disassembly
CAUTION: Spring Under Tension!
Do not remove the center screw from the starter until
the spring tension is released. Removing the center
screw before releasing spring tension, or improper
starter disassembly, can cause the sudden and
potentially dangerous release of the spring. Follow
these instructions carefully to ensure personal safety
and proper starter disassembly. Make sure adequate
eye and face protection is worn by all persons in the
area.
1. Release spring tension and remove the handle
and starter rope. (Refer to ‘‘Rope Replacement,’’
steps 2 through 5 on page 7.2.)
2. Remove the center screw, washer, and pawl
retainer. See Figure 7-5.
Figure 7-5. Center Screw, Washer and Pawl Retainer.
3. Remove the brake spring and brake washer. See
Figure 7-6.
4. Carefully note the positions of the pawls and pawl
springs before removing them.
Remove the pawls and pawl springs from the
starter pulley.
5. Rotate the pulley
clockwise 2 full turns
. This will
ensure the spring is disengaged from the starter
housing.
6. Hold the pulley into the starter housing. Invert the
pulley/housing so the pulley is away from your
face, and away from others in the area.
7. Rotate the pulley slightly from side to side and
carefully separate the pulley from the housing.
See Figure 7-7.
If the pulley and the housing do not separate
easily, the spring could be engaged in the starter
housing, or there is still tension on the spring.
Return the pulley to the housing and repeat step
5 before separating the pulley and housing.
Figure 7-6. Brake Spring and Washer, Pawls, and
Pawl Springs.
Figure 7-7. Removing Pulley from Housing.
8. Note the position of the spring and keeper
assembly in the pulley. See Figure 7-8.
Remove the spring and keeper assembly from
the pulley as a package.
Housing
Pulley
CAUTION: Spring Under Tension!
Do not remove the spring from the keeper. Severe
personal injury could result from the sudden uncoiling
of the spring.
Center Screw and
Washer
Pawl Retainer
Brake Spring and
Brake Washer
Pawls
Pawl
Spring
Содержание CV11-16
