8. Complete the Installation
Power Indication LED
Turn ON the water supply and open water inlet supply isolators.
Turn ON the electrical supply to digital mixing valve.
The digital mixing valve will power and perform a self-check where the LED will indicate a RED light initially and
will then change to BLUE light after a few seconds.
NOTE: If the LED does not turn to a solid BLUE light after 10 seconds, indicating the product is ready to use, refer to the
troubleshooting or fault diagnosis section.
Follow the instructions supplied with your User Interface to check that all outlets are functioning.
Your digital valve is now ready for use.
Kohler Co.
21
1430528-W2-
A
