11
1317134-W2-B
6.0 mm
3
b
c
a
d
x4
x4
6 mm
x4
x4
(a)
Position the second wall channel on the wall using the dimensions supplied
in the above table on page 10 for correct enclosure size. Using a spirit level
make sure that it is upright.
(b)
Mark the position of the fixing holes, then remove the wall channel.
(c)
Drill with a 6 mm masonry bit (not supplied) and plug using the wall plugs
(supplied).
(d)
Position the wall channel on the wall and partially install the fixing screws.
(e)
Apply silicone sealant according to the manufacturers instructions along the
length of the wall and at the bottom of the wall channel.
(f)
Ensure spacers are on the screws. Fully tighten the fixing screws, making sure
that the wall channel is upright.
± 0 mm
Screw Head
Spacer
Note!
Trim wall
plugs to finished
wall surface, as wall
channel will not sit
flat if they are proud.
Note! Ensure longer face of the wall channel is on outside of the
enclosure.
Note!
Use hand
screw driver only to
avoid damage to the
plastic spacers.
Содержание Ascend Series
