Kohler Mira Ascend Series, Руководство по установке

Страница: 3 / 28

3 1317134-W2-B
Before Fitting the Enclosure
1. Ensure the tray is level and walls are vertical and square.
2. Shower fittings should be positioned such that water discharges down the
centre line of a bath or across the opening of a shower cubicle door.
3. Ensure water is not directed at the shower door or side panels. This could result
in water spraying outside of the enclosure.
4. Ensure the door opening is positioned correctly and is adequate for all users.
5. Ensure there is a complete silicone seal between the tray and finished wall.
6. Ensure the door is undamaged and no parts are missing.
7. Ensure the size of door/panel is suitable for the installation. Tempered safety
glass cannot be cut.
8. Ensure nothing can impact the door or glass panels during operation.
When Fitting the Enclosure
1. The wall channels must be installed onto a tiled or waterproof finished flat and
even wall surface. Failure to do so will result in an unsatisfactory seal, which
may cause property damage.
2. We recommend our enclosures are fitted onto shower trays.
Warning! The use of grout/tile cleaners, scale removers, abrasive scourers,
drain unblockers and other powerful detergents may lead to damage of metallic,
plated and plastic surfaces, including the tray and shower waste.
Use of the Enclosure
1. High water pressure and flow may lead to excessive splashing causing water
to escape outside of the enclosure.
2. In certain circumstances such as cleaning, water sprayed directly at the seals
may escape outside of the enclosure.
3. With any walk in or open ended enclosure, splashing may cause water to
escape outside of the enclosure.
Your enclosure has the benefit of our guarantee which starts from date of purchase.
For terms and conditions refer to the guarantee booklet packed with the product.
Guarantee