Usage Notes
•
When using the record button “
” in a VCR or DVD player, the record button
“ ” will need to be pressed and held for approximately 2 seconds.
•
Once you turn on the learning function on the remote control, the built-in clock
will stop working. You will have to reset the clock after each time you use the
learn function. For this reason, we recommend you teach the remote controller
signals for as many devices as you can at one time.
•
When you are connected to an A/C, the keys “ ” can be
used for learning. For all other appliances, all of the function keys are usable.
•
In regards to the Learn code and the Key Transfer code, be sure to put the key in
the same storage area when using the one home appliance, so that the codes will
cover each other. When using a single home appliance, the same key cannot
store both the Learn code and the Key Transfer code concurrently.
•
While using the menu, if you do not press any keys within 2~3 minutes, the
system will back out from the menu. If you do not press any keys within 5~6
minutes, the LCD screen will power off.
Battery Installation
Open the battery compartment cover as shown below, then install 3 new AAA batteries,
making sure the + and – polarities match the markings inside the compartment.
Precautions:
1. Do not use old and new batteries, or different brand batteries at the same time.
2. In the event of any liquid leaking from a battery, be sure to remove the battery
and to clean the battery compartment before replacing with a new battery.
3. Be sure to remove the batteries from the remote if you will not be using the
remote controller for a long period of time.
Operational Interfaces
There are six different interfaces for this remote controller, each suited to different
household equipment: TV, VCR, SAT, DVD, CD and A/C (air conditioner). It is possible to
simply press the equipment key to select.
3
