3. Press OK, and “
” will blink. Press OK again to enter learning mode, and “ ”
will blink.
4. Press the equipment key to switch to the appliance mode of the household
appliance to be learnt. (For example, if you are learning from your TV remote,
press the TV key).
5. Press and hold a certain function on the target remote controller to send out it's
code until the “
” icon stops flashing, then release the key. This means the code
from the original remote has been learned.
6. Press the corresponding key to be learned on the learning remote, at which point
“ ” will blink again. Now, other keys from the remote controller can be learned.
Learn each key as required until all keys have been learned. Press the SET key
once to exit from learning mode. Press the EXIT key to return to the TV interface.
Cancelling the learning function
Press SET to shift to the TV interface hold the SET key for about 5 seconds to go into
→
Settings mode press the “ ” key to go to “LEARN” mode press the OK button
→
→
→
press “
” to shift to the “
” mode.
Press OK to go into “
” mode press the key for the function that has been learned,
→
at which point the “ ” in “
” will blink once, meaning the key has been cancelled.
Repeat these steps to cancel all information you want removed press SET to withdraw
→
and return to the “LEARN” mode, then press EXIT to return to the TV interface.
8
