Koehler K44100, Руководство по эксплуатации и инструкция, Страница: 14 / 20

K441XX Automatic Non-Woods Metal Noack Evaporative Apparatus
Operation and Instruction Manual
K441XX-Manual
- 13 -
6.5 The Results Browser

Every analysis performed is automatically
recorded. The results browser grants access
to the analysis archive.

Use the two arrows on the top of the screen
to choose the month/year. See Figure 13
below:
o
The Month’s corresponding days
are shown in gray if no analysis
has been performed.
o
The day is shown in black if the day
holds more than one analysis
o
When a day is selected, a green
box will appear around that day

From top to bottom the analysis are enlisted
in order of time:
o
For example in the picture below
the two analysis where performed
at 01:38:14 and 02:18:48 on June
25, 2010.

A - sign (as shown in sample 1)
means a final weight has not
been entered

A ± sign (as shown in sample
2) means the sample has been
fully completed.
o
The two arrows located on the side
allow the operator to select the
sample.
o
Press the
Load Analysis Button
(in
between the two arrows) to view
the analysis.
Figure 13: Results Browser Main Screen
If the final weight has not been introduced a
question mark will appear in the
C Sample
Final Weight
Field as shown in Figure 14:
Figure 14: Incomplete Final Weight Screen
To enter the final result, or review any previous
parameters, press the
Review Analysis
button (top
button on the right hand side). See Figure 15 below:
Figure 15: Review Analysis Screen
Once the final weight is entered the result will
automatically be calculated according to the method
chosen. It is also possible to review/change the
other parameters by selecting the
Change
button
located on the right hand side of the shown values.
Once the final weight has been introduced press
the
ACCEPT
button to confirm, or
CANCEL
to
discard the changes and close the panel. Refer to
Figure 15 above.
Once the analysis has been reviewed and
completed with the final weight, the result browser
will automatically show the result and the equivalent
result for the other available method. See Figure
16: