Koden CVS-1410, Руководство по эксплуатации

Страница: 40 / 81

Chapter 2 How to use the menu CVS-1410B
2-6 0093114105-03
White line
1
Press the [MENU] key
2
Select [Display1] → [White line].
(See [2.1
How to operate the menu])
3
Press the [ ] key.
4
Change the setting of [White line].
“1” is narrowest. “5” is widest.
In the auto mode, responding to the
strength of echo reflected from the bottom,
the width of white line changes. (Press the
[ ] key or [ ] key)
White line
OFF
1
2
3
4
5
Auto
5
Press the [MENU] key to close the menu.
2.13 Setting of Alarm
6 alarms of bottom alarm, fish alarm, water temp
alarm, speed alarm, arrival alarm and XTE alarm
can be set.
They are notified by alarm sound and alarm
display.
[Bottom alarm] issues the alarm when the
position recognized as the bottom is shallower
than the upper limit or deeper than the lower
limit. It is convenient when keeping the specific
depth.
(Setting: m: 0 to 800, fm, I.fm: 0 to 500, ft: 0
to 2600)
[Fish alarm] issues the alarm when an echo
recognized as school of fish exists in the set
range.
(Setting: m: 0 to 800, fm, I.fm: 0 to 500, ft: 0
to 2600)
It is convenient for you to judge whether the
echo of school of fish is present or not.
(Setting:
m: 0 to 800, fm, I.fm: 0 to 500, ft: 0 to 2600)
Caution: In the [Level], select the
strength of echo reflected from the
schools of fish in the [Fish alarm].
[Water temp alarm] issues when the water temp
is within or out of the set range. It is convenient
to keep the specific water temp region. (Setting:
- 5 to 45 ºC, 23 to 113 ºF)
[Speed alarm] issues when the boat speed is
faster or slower than the set range. It is
convenient when the speed limit is obliged.
(Setting: 0 to 80 kn, 0 to 148 km/h)
[Arrival alarm] can be used in the state that the
destination is set. The alarm is issued when your
boat arrives within a certain range of destination.
A certain range is set in the [NAV alarm range].
(See [1.9
Use of [EVENT] key
.)
[XTE alarm] can be used in the state that the
destination is set. The alarm is issued when your
boat is off a certain distance from the course on
the line drawn straightly from destination to the
location when setting the destination. A certain
distance is set in the [NAV alarm range].
Caution: In the [NAV alarm range], select
the alarm range of [Arrival alarm]
and [XTE alarm]. (Setting: 5 to 999
m)
Caution: The setting range of [Arrival
alarm] and [XTE alarm] can not be
separately set.
Stopping the alarm sound
To stop the alarm sound and the alarm display,
press [MENU] key.