Koden CVS-1410, Руководство по эксплуатации

Страница: 51 / 81

CVS-1410B Chapter 2 How to use the menu
0093114105-03 2-17
6
Select the [ON] or [OFF]. (Press the [ ]
key or [ ] key)
7
Press the [MENU] key to close the menu.
Sub Depth Value
Depth value can be displayed with the selected
depth unit independently in addition to the Main
depth value.
1 Press the [MENU] key.
2 Select the [System] → [Sub Depth Value].
(See [2.1 How to operate the menu])
3 Press the [ ] key.
4 Select the Sub Depth unit from [m], [fm],
[I.fm] or [ft].
To stop the display of Sub Depth Value,
select [OFF]. (Press the [ ] key or [ ] key)
5 Press the [MENU] key to close the menu.
Change the User setting
A set value of the menu entry can be
memorized by four patterns. It is convenient to
switch the pattern according to the purpose of
the fishery.
Caution: The unit set to [1] at the
factory.
1
Press the [MENU] key.
2
Select the [System] → [User set]. (See [2.1
How to operate the menu])
3
Press the [ ] key.
4
Select the [2]. (Press the [ ] key or [ ]
key)
5
Press the [MENU] key to close the menu.
6
When a set value of the menu entry is
changed, it is automatically memorized in
[2].
7
[3] and [4] also memorize a set value of
the menu entry by a similar operation, and
it is possible to switch.
Change the scale type
The interval of indications of scale can be
changed.
1
Press the [MENU] key.
2
Select the [Display2]

[Scale type]. (See
[2.1 How to operate the menu])
3
Press the [ ] key.
4
Select the [Scale type]. (Press the [ ] key
or [ ] key)
5
Press the [MENU] key to close the menu.
Change the bottom color
The dark red color of sea bottom can be
changed.
1 Press the [MENU] key.
2 Select the [Display2]

[Color table 2]

[Bottom color]. (See [2.1 How to operate
the menu])
3 Press the [ ] key.
4 Select the [Bottom color]. (Press the [ ]
key or [ ] key)
Black

0, , , 176, , , 255

Red
5 Press the [MENU] key to close the menu.
Change the image partition
The image partition of echo sounder can be
change to "Horizontal split" or “Vertical split”.
1
Press the [MENU] key.
2
Select the [Image]

[Image partition].
(See [2.1 How to operate the menu])
3
Press the [ ] key.
4
Select the [Image partition]. (Press the [ ]
key or [ ] key)
5
Press the [MENU] key to close the menu.
Display the frequency / Stop the
display of frequency
The frequeny of the transducer currently in use
can be displayed.
1 Press the [MENU] key.
2 Select the [Display2] → [Freq display].
(See [2.1 How to operate the menu])
3 Press the [ ] key.