Koden CVS-1410, Руководство по эксплуатации

Страница: 48 / 81

Chapter 2 How to use the menu CVS-1410B
2-14 0093114105-03
the [ ] key or [ ] key.)
5
Press the [MENU] key to close the menu.
Caution: When the fish symbol function
is made effective, this function
becomes invalid.
D.Range
D.Range is to expand and narrow down the
signal range from blue to red in images.
When the value is small, the expression range
of strong and weak signal change is narrow,
weaker signal will become undistinguished.
When the value is larger, the expression range
is wider and the weaker signals become distinct.
(Setting: 12 to 30dB)
1
Press the [MENU] key.
2
Select the [Adjust] → [D.Range]. (See [2.1
How to operate the menu])
3
Press the [ ] key.
4
Change the setting of [D.Range]. (Press
the [ ] key or [ ] key.)
5
Press the [MENU] key to close the menu.
Display Width
When the image is zoomed or the High
frequency / Low frequency displayed, the
display width can be changed.
1 Press the [MENU] key.
2 Select the [D.range] → [Disp. width].
(See
[2.1 How to operate the menu])
3 Press the [ ] key.
4 Select the width of image. (Press the [ ]
key or [ ] key)
5
Press the [MENU] key to close the menu.
Display the A scope / Stop the
display of A scope
The echo strength of latest echo can be
displayed at the right side of echo sounder
display.
The strength of echo sounder image is
expressed by the horizontal width. This
expression is called [A scope].
The width for strong echo is wide and the width
for weak echo is narrow. This makes it easier
for you to see the echo.
1
Press the [MENU] key.
2
Select the [Display1] → [A scope]. (See
[2.1 How to operate the menu])
3
Press the [ ] key.
4
To display the A scope, select the [ON].
To stop the display of A scope, select the
[OFF]. (Press the [ ] key or [ ] key)
5 Press the [MENU] key to close the menu.
Change the display color of echo
sounder image
The [Monochrome], [8 color], [16 color] and [64
color] can be selected.
1
Press the [MENU] key.
2
Select the [Display1] → [Color tone]. (See
[2.1 How to operate the menu])
3
Press the [ ] key.
4
Select the [Color tone]. (Press the [ ] key
or [ ] key)
5 Press the [MENU] key to close the menu.
Change the depth value
The display size of depth value can be
changed.
1 Press the [MENU] key.
2 Select the [Display1] → [Depth value].
(See [2.1 How to operate the menu])
3 Press the [ ] key.
4 Select the size of display. (Press the [ ]
key or [ ] key)
5
Press the [MENU] key to close the menu.
Display the depth unit / Stop the
display of depth unit
The depth unit can be displayed.
1
Press the [MENU] key.