. . . . . . . . . . . . . . . . . . . . . . . . . . . . .
5-22
Using the KODAK Driver for Adobe Photoshop (Macintosh)
G
time while working with the scanner, clean the scanner “diffuser” (a
3 x 4-inch piece of white plastic), as summarized in this note, and as fully
described at the end of “Appendix C — Troubleshooting.”
A. Remove the calibration mask and single frame holder adapter or multi-
frame holder.
B. Orient the dust removal tool as shown below, and with an up and down
motion, clean the surface of the diffuser making sure the fiber strip makes
contact with the diffuser.
KODAK Professional
RFS 3570 Film Scanner
THIS SIDE
TOWARD FRONT
OF MACHINE
Diffuser
Dust removal tool
Fiber strip
C. Remove the dust tool, replace the mask and holder, and rescan the
image.
D. If the problem continues, use the scanner software R
ECALIBRATE
button as
described in “Appendix C — Troubleshooting.”
