Kodak PROFESSIONAL RFS 3600, Руководство пользователя

Страница: 34 / 119

34
C. If the frame is not centered properly in the scan position, tap the
Reverse or Forward buttons on top of the scanner as needed to move
the filmstrip in fine increments over the current frame. As you do,
you can watch the film movement through the viewer on the top of
the scanner to ensure that the frame is properly centered. Then click
the Prescan Frame button again. You can perform the same function
in the software as described in
Reference – Software (Film Motion) .
2. Prescan the full filmstrip.
Click the Prescan Strip button; the entire filmstrip is prescanned,
thumbnails appear across the top of the screen, and the first image
scanned automatically appears in the image area in the center of the
screen. The screen examples in the remaining portions of this chapter
assumes you have prescanned a filmstrip rather than a single image.
(If you wish, you can press the cancel button you see in the dialog box
at any time to cancel the prescan strip action before it prescans all
frames on the filmstrip.)