Kodak PROFESSIONAL RFS 3600, Руководство пользователя

Страница: 21 / 119

21
G
C
F
E
D
C. Position the scanner so that you can connect it in the chain before
the terminated device.
D. Attach the end of the cable you just disconnected to either of the
identical SCSI ports on the back of the scanner; make sure the con-
nector is well seated.
E. Attach one end of your SCSI cable to the empty SCSI port on the
scanner; make sure the connector is well seated.
F. Attach the other end of your cable to the empty SCSI port on the
internally terminated device; make sure the connector is well seated.
G. Set the SCSI termination switch on the back of the scanner to the off
position.
Setting the Scanner SCSI Identification Number
Each SCSI device connected to the same computer must have a different
SCSI ID number. Be certain that the number is unique, and assign high ID
numbers to devices used most frequently.
1. If SCSI devices other than the scanner are connected to your computer,
determine their SCSI identification numbers so that you can select a