Section 5 – Troubleshooting
5-15
2000 March Rev. B 8186546
Print QC Step Wedge
To print a QC step wedge:
1. Access the QC Step Wedge menu by pressing
Test
.
2. Initiate the test print by pressing
Enter
.
If the step wedge prints successfully, the Print QC Step Wedge menu is
again displayed.
If a fault occurs, an error message is displayed.
3. To cancel the test, press
Exit
. The system displays a “PRINT CANCELLED BY
OPERATOR” message.
4. To return to “System Ready,” press
Exit
.
Print SMPTE Pattern
To run a Print SMPTE Pattern test:
1. From the QC Step Wedge menu, press
to access the Print SMPTE Pattern
display.
2. To print the SMPTE pattern, press
Enter
.
Follow instructions on the local panel to set up conditions for the test.
If the print completes successfully, the Print SMPTE Pattern menu is
displayed.
If a fault occurs, an error message is displayed.
3. To cancel the print, press
Exit
. The system displays a TEST CANCELLED BY
OPERATOR message.
4. To return to the first Print SMPTE Pattern menu, press
Exit
.
Содержание Kodak DryView 8600
