Kodak Kodak DryView 8600, Руководство пользователя

Страница: 25 / 77

DryView 8600 User Guide
2-8
8186546 1999 June Rev. A
Menu Change Procedure
To change an individual parameter:
1. Select an input module by pressing either the A Setup or B Setup button.
(B Setup is not currently used.)
2. Access the parameter menu by using the Down or Up Arrow buttons to scroll
through the list.
Note
The location of each parameter menu is shown earlier in this section.
3. When the correct parameter is displayed, press Enter to access the parameter’s
change menus.
You may find that you need to change information in a series of menus.
Each menu display contains an Information line (upper line) and an Action line
(lower line) instruction. (The Action line tells you how to change the parameter
and how to continue.)
4. Use the arrow buttons or the numeric keypad to change the value and then
continue to the next menu as instructed.
Note
If you enter a value that is out of range, the imager beeps. Clear the entry by
pressing the Clear button (see step 5) and re-entering the appropriate value.
5. When you have made changes to a menu, press one of the following buttons to
exit the menu:
To accept the changes and exit to the previous menu, press Enter.
To cancel the changes and exit to the previous menu with the original values
displayed, press Exit.
To delete a change and re-enter values for a parameter, press Clear. (Clear
does not exit from the current menu.)
Each parameter menu is listed in alphabetical order in Table 2-1.