manualshive.com logo in svg

Kodak DryView 8100, Руководство пользователя, Страница: 52 / 75

Поделиться
Скачать
Kodak DryView 8100 Скачать руководство пользователя страница 52

Troubleshooting

5-3 

2000 March Rev. B    8754020

Status
Code

Explanation

Local Panel
Message

S16

Wait

1. The imager is completing films in process before

unlatching the front door or,

2. There is an error condition. See error message on

line 2 of the display.

The user can continue to acquire and queue prints,
but the imager will not print until the condition has
been corrected.

S21

Door Open

The front door is open.

The user can continue to acquire and queue prints,
but the imager will not print until the door has been
closed.

S22

Hood Open

The upper hood is open.

The user can continue to acquire and queue prints,
but the imager will not print until the hood has been
closed.

S23

Doors Open

The front door and upper hood are both open.

The user can continue to acquire and queue prints,
but the imager will not print until the door and hood
have been closed.

S24

Crtg Openg

The imager is opening the film cartridge after the
front door has been closed.

The user can acquire and queue prints, but the
imager will not print until the cartridge is fully open.

S25

Crtg Clsng

The imager is closing the film cartridge before
unlatching the front door.

The user can continue to acquire and queue prints,
but the imager will not print until the front door is
closed and the cartridge reopened.

Содержание DryView 8100












































































Отзывы:

Нет отзывов