manualshive.com logo in svg

Kodak DryView 8100, Руководство пользователя, Страница: 3 / 75

Поделиться
Скачать
Kodak DryView 8100 Скачать руководство пользователя страница 3

DryView 8100 Laser Imager User Guide

ii

  8754020  2000 March Rev.B

Read and understand all instructions before using.

!

CAUTION

 

Do not use in the presence of flammable anesthetics, oxygen or nitrous oxide. This
equipment does not have a gas sealed electronics enclosure and could ignite any
flammable or explosive gases present in its environment.

!

CAUTION

This equipment is intended to connect to other medical devices. Installation and
service maintenance are to be performed only by qualified service personnel. The
laser in the equipment is not a patient device. Therefore the equipment must be
installed no closer than 1.83 meters from a patient bed or chair.

!

CAUTION

Do not substitute or modify any part of this equipment without approval of Eastman
Kodak Company.

!

CAUTION

This equipment has been tested and found to comply with the limits for a Class B
digital device, pursuant to part 15 of the FCC rules. Those limits are designed to
provide reasonable protection against harmful interference in a residential
installation. This equipment generates, uses, and can radiate radio frequency
energy and, if not installed and used in accordance with the instructions, may cause
harmful interference to radio communications. However, there is no guarantee that
interference will not occur in a particular installation. If this equipment does cause
harmful interference to radio or television reception, which can be determined by
turning the equipment off and on, the user is encouraged to try to correct the
interference by one or more of the following measures:

Reorient or relocate the receiving antenna.

Increase the separation between the equipment and the receiver.

Connect the equipment into an outlet on a circuit different from that to which the
receiver is connected.

Consult the dealer or an experienced radio/TV technician for help.

Содержание DryView 8100












































































Отзывы:

Нет отзывов